The Woody Weed Tech Sheets contain all the information you need to treat individual weeds in your paddock. There is a tech sheet dedicated to each significant weed in Australia.
Use the controls at the bottom of the page to get the most from this useful new tool from the Woody Weed Specialists.
Register for exclusive access to more than 50 years of weed knowledge, tools and resources, in one convenient online location.
Vigilant II is the new, convenient way of controlling noxious and environmental weeds. It has shown good activity on 49 weeds ranging from African boxthorn to wild tobacco tree. This ready-to-use gel can be used as a spot treatment for a wide range of troublesome woody, rhizomatous and herbaceous weeds.
Find labels for this product
Corteva Website Woody Weed Control GuideWeed Identification
Vigilant II is designed for those who wish to control noxious and woody weeds but do not have access to chemical spray equipment. It is available in an easy-to-manage 240 mL pack that can be refilled from a 5 L container via a handy pump. It is formulated as a gel, which is applied as a paste directly from the pack; no mixing, no dripping, no exposure. In fact the label requires no personal protective equipment, not even gloves – though it’s always a good idea to wear gloves in any situation when applying treatments. Vigilant II controls more than 49 weeds, ranging from African boxthorn to wild tobacco tree – a wide range of woody and herbaceous weeds and rhizomatous plants.
With its degree of simplicity of use (particularly with regard to required paperwork) and efficacy, some councils and vegetation management companies are now only carrying Vigilant II.
4.47 g/L aminopyralid + 44.7 g/L picloram
240 mL (plus 5 L refill pack with pump)
No preparation of Vigilant II is required. Simply spread the gel directly from the applicator pack on to the target weeds: a) Herbaceous weeds, such as thistles Apply Vigilant II gel directly onto the weed leaves by wiping the applicator pack in one direction along the length of leaf. Ensure half of the weed leaves are wiped.
b) Rhizomatous weeds, such as agapanthus Cut back the leaves of the weed horizontally to just above the crown and apply a 3–5 mm coating of Vigilant II gel across the cut surfaces. c) Woody weeds with stems less than 2 cm in diameter Employ a ‘scrape and paint’ technique. Use a knife to scrape off the thin bark on at least half of the weed stems. Each exposed strip should be 20–30 cm in length. Immediately after exposing the sap tissue beneath the bark, apply Vigilant II gel by wiping the applicator in one direction along the exposed surface. d) Woody weeds with stems greater than 2 cm in diameter Cut the stems or trunk close to the ground (no higher than 10 cm) and immediately apply a 3–5 mm thick layer of Vigilant II gel to the cut surface.
In general, smaller weeds are easier to control with Vigilant II than larger ones. Vigilant II is most effective when applied to weeds that are not stressed due to lack of moisture, excessive heat, insect damage, etc. and are actively growing. Actively growing weeds will draw the chemical into the vascular system and transport it through the stems and down to the roots to ensure maximum efficacy. A general guide to the best time of the year in which to treat common woody weeds can be found in this table. Vigilant II gel needs to dry on the treated leaves and stems before any rainfall occurs or else there is a risk of it being washed off and becoming ineffective. Do not apply Vigilant II if there is a risk of rainfall within 12 hours of application. Similarly, avoid application to leaves if they are wet from rainfall or dew. Once the weeds have been treated, leave them undisturbed so that the chemical is able to move throughout the leaves, stems and roots and provide complete kill. Disturbing the weeds by slashing, burning, mulching, etc. before the chemical is fully distributed will compromise the control achieved. We recommend that blackberries and other woody weeds not be disturbed for six months after treatment to maximise the performance of Vigilant II.
Vigilant II is a spreadable gel, with application rates described above in Application Methods. It requires no preparation prior to use.
Vigilant II is a spreadable gel that requires no preparation prior to use.
The Vigilant II label carries the signal heading Caution and must be stored out of the reach of children. During application, avoid contact with skin or eyes. As noted above, although no PPE is specified on the label, best practice is always to wear suitable protective gloves when applying the gel to the target weeds. A copy of the Safety Data Sheet can be accessed here.
Vigilant II poses little risk to stock and because of that and the method of use, there is no stock grazing withholding period. This means that stock can continue to graze in paddocks while weeds are being treated. However, care does need to be taken because some treated weeds often become very palatable to stock, as there is an increase in the plant’s sugar content as it dies, and stock will preferentially graze on these over the pasture grasses. If naturally toxic weeds such as ragwort, variegated thistle and capeweed are being treated, stock should be kept from the paddocks until these weeds have died.
Many desirable crops and ornamentals are very sensitive to Vigilant II so care must be taken when applying the product to avoid getting the gel on any leaves or stems of desirable plants. Also ensure application does not take place within 12 hours of any rainfall, which could wash the gel from the treated weeds onto desirable, non-target plants. Plants susceptible to Vigilant II include (but are not limited to) fruit trees, grape vines, legumes (pea, beans, lucerne, etc.), potatoes, roses, shade trees and tomatoes.
Vigilant II is a very powerful herbicide. Recharge can occur when heavy rain allows for some of the herbicide to seep into neighbouring soil. Care therefore needs to be taken when planting new plants, trees or crops into areas where Vigilant II has been applied.